Declaration:

PROCEDURE   AttachDefaultTextureSpace

(   obj :HANDLE;     partID :INTEGER ) ;

Special Notes:

AttachDefaultTextureSpace is obsolete as of Vectorworks 2009

Description:

Procedure AttachDefaultTextureSpace deletes any pre-existing space attached to the referenced object and creates a new one with the default object texture.

Parameters:

obj	Handle to object.
partID	Part ID (pass 1 for non-supporting objects).

Declaration:

FUNCTION   CreatePaintFromImage

( image:HANDLE ) :HANDLE ;

Description:

Creates a paint node from an image resource.

Parameters:

image

Handle to the image resource from which a paint node is to be created.

Result:

Returns the handle to the newly created paint node.

Example:

paintHandle := CreatePaintFromImage(imageHandle);

Declaration:

FUNCTION   CreatePaintFromImgN

(   image :HANDLE;     locPtX :REAL;     locPtY :REAL;     rotDeg :REAL ) :HANDLE ;

Description:

Creates a paint node from an image resource on the specified location and rotation.

Parameters:

image	Handle to the image resource from which a paint node is to be created.
locPt	Location of the new paint nodet.
rotDeg	Rotation of the paint node in degrees.

Declaration:

FUNCTION   CreateShaderRecord

(   texture :HANDLE;     family :LONGINT;     prototype :LONGINT ) :HANDLE ;

Description:

Creates a shader record of the desired family (1 = color, 2 = reflectivity, 3 = transparency, 4 = bump) and prototype (constants depend on family value).

Table - Color Shader Family

Prototype	Constant
Blue Marble	1
Chrome	2
Cubes	3
Decal	4
Marble	5
Plain Color	6
Simple Wood	7
Clouds	8
Solid Polka	9
Wrapped Brick	10
Wrapped Checker	11
Wrapped Diagonal	12
Wrapped Filtered Image	13
Wrapped Grid Color	14
Wrapped Image Color	15
Wrapped Polka	16
Wrapped Horiz Stripe	17
Wrapped Textured Brick	18
Wrapped Vertical Stripe	19
Wood	20
Oak	21
Maple	22
Birch	23
Cherry	24
Pine	25
Wrapped Wood Floor	26
Wrapped Oak Floor	27
Wrapped Maple Floor	28
Wrapped Birch Floor	29
Wrapped Cherry Floor	30
Wrapped Pine Floor	31
Wrapped Brick Bonds	32
Granite	33
Roof Tiles	34

Table - Reflectivity Shader Family

Prototype	Constant
Chrome 2D	1
Conductor	2
Constant	3
Dielectric	4
Glass	5
Matte	6
Metal	7
Mirror	8
Phong	9
Plastic	10
Wrapped Image	11

Table - Transparency Shader Family

Prototype	Constant
Eroded	1
Plain Transparency	2
Color Filter	3
Wrapped Checker Transparency	4
Wrapped Grid Transparency	5
Wrapped Image Transparency	6
Wrapped Mask Transparency	7
Wrapped Square	8

Table - Bump Shader Family

Prototype	Constant
Cast	1
Simple Rough	2
Wrapped Image Bump	3
Wrapped Dimple	4
Wrapped Knurl	5
Wrapped Rough	6
Wrapped Treadplate	7

Parameters:

texture	The shader record will be attached to this texture.
family	The kind of shader to create (1 = color, 2 = reflectivity, 3 = transparency, 4 = bump)
prototype	The specific shader within the family (constants depend on the family value).

Declaration:

FUNCTION   CreateTexture

:HANDLE ;

Description:

Function CreateTexture creates a new texture object with default values.

Declaration:

FUNCTION   CreateTextureBitmap

:HANDLE ;

Special Notes:

CreateTextureBitmap is obsolete as of VectorWorks10.1

Description:

Function CreateTextureBitmap creates a new default texture bitmap in a Vectorworks document.

Declaration:

FUNCTION   CreateTextureBitmapN

( shaderRecord:HANDLE ) :HANDLE ;

Description:

Creates a texture bitmap object for the chosen shader record. Brings up dialog to choose the image file. Returns nil if user clicked Cancel or if the shader is not an image-based shader.

Parameters:

shaderRecord

Handle to shader record.

Declaration:

PROCEDURE   DeleteTextureSpace

(   obj :HANDLE;     partID :INTEGER ) ;

Special Notes:

DeleteTextureSpace is obsolete as of Vectorworks 2009

Description:

Function DeleteTextureSpace deletes the texture space attached to the referenced object or object part.

Parameters:

obj	Handle to object.
partID	Part ID (pass 1 for non-supporting objects).

Declaration:

FUNCTION   EditShaderRecord

( shaderRecord:HANDLE ) :BOOLEAN ;

Description:

Brings up the edit shader dialog for this shader. Returns true if the user pressed the OK button to dismiss the dialog.

Parameters:

shaderRecord

The shader record to edit.

Declaration:

FUNCTION   EditTexture

( texture:HANDLE ) :BOOLEAN ;

Description:

Function EditTexture opens the Edit Texture dialog for the referenced texture.

Parameters:

texture

Handle to texture.

Declaration:

FUNCTION   EditTextureBitmap

( textureBitmap:HANDLE ) :BOOLEAN ;

Special Notes:

EditTextureBitmap is obsolete as of VectorWorks9.0

Description:

Function EditTextureBitmap opens the Edit Texture Bitmap dialog box to the referenced texture bitmap. The function returns TRUE if texture bitmap was modified.

Parameters:

textureBitmap

Handle to texture bitmap.

Declaration:

FUNCTION   EditTextureSpace

(   obj :HANDLE;     partID :INTEGER ) :BOOLEAN ;

Special Notes:

EditTextureSpace is obsolete as of Vectorworks 2009

Description:

Function EditTextureSpace edits the mapping of a specified texture space for the referenced object. Calling this function opens the Edit Mapping dialog for textures.

Parameters:

obj	Handle to object.
partID	Part ID (pass 1 for non-supporting objects).

Result:

Returns TRUE if the texture space was modified.

Declaration:

FUNCTION   GetClTextureC

( className:STRING ) :LONGINT ;

Description:

Function GetClTextureC returns the wall center texture of the specified class.

Parameters:

className

Class name.

Declaration:

FUNCTION   GetClTextureD

( className:STRING ) :LONGINT ;

Description:

Function GetClTextureD returns the roof dormer texture of the specified class.

Parameters:

className

Class name.

Declaration:

FUNCTION   GetClTextureG

( className:STRING ) :LONGINT ;

Description:

Function GetClTextureG returns the generic texture of the specified class.

Parameters:

className

Class name.

Declaration:

FUNCTION   GetClTextureL

( className:STRING ) :LONGINT ;

Description:

Function GetClTextureL returns the left side wall texture of the specified class.

Parameters:

className

Class name.

Declaration:

FUNCTION   GetClTextureR

( className:STRING ) :LONGINT ;

Description:

Function GetClTextureR returns the right side wall texture of the specified class.

Parameters:

className

Class name.

Declaration:

FUNCTION   GetClTextureT

( className:STRING ) :LONGINT ;

Description:

Function GetClTextureT returns the roof top texture of the specified class.

Parameters:

className

Class name.

Declaration:

FUNCTION   GetClUseTexture

( className:STRING ) :BOOLEAN ;

Description:

Function GetClUseTexture returns whether a classes' texture attributes will be used at object creation.

Parameters:

className

Class name.

Declaration:

FUNCTION   GetNumTexLayers

(   obj :HANDLE;     texPartID :LONGINT ) :LONGINT ;

Description:

Returns number of texture layers (base + decals) for the specified part.

Declaration:

FUNCTION   GetObjExpandTexture

( obj:HANDLE ) :BOOLEAN ;

Special Notes:

GetObjExpandTexture is obsolete as of Vectorworks 2009

Description:

Function GetObjExpandTexture returns whether the referenced objects' textures have been "expanded". When a texture is expanded, different components of an object can have different textures.

Parameters:

obj	Handle to object.

Declaration:

FUNCTION   GetShaderRecord

(   texture :HANDLE;     family :LONGINT ) :HANDLE ;

Description:

Returns the shader record of the specified family (1 = color, 2 = reflectivity, 3 = transparency, 4 = bump), if one is attached to the texture.

Parameters:

texture	Get the shader record attached to this texture.
family	The kind of shader to retrieve (1 = color, 2 = reflectivity, 3 = transparency, 4 = bump).

Declaration:

PROCEDURE   GetTexBFeatureEnd

(   textureBitmap :HANDLE;   VAR  featureEndX :INTEGER;   VAR  featureEndY :INTEGER ) ;

Description:

Procedure GetTexBFeatureEnd returns the "feature endpoint" of the referenced texture bitmap. The point is expressed in pixels from the top left corner of the bitmap.

Parameters:

textureBitmap	Handle to texture bitmap.
featureEndX	Returns X coordinate of feature end point.
featureEndY	Returns Y coordinate of feature end point.

Declaration:

PROCEDURE   GetTexBFeatureStart

(   textureBitmap :HANDLE;   VAR  featureStartX :INTEGER;   VAR  featureStartY :INTEGER ) ;

Description:

Procedure GetTexBFeatureStart returns the "feature startpoint" of the referenced texture bitmap. The point is expressed in pixels from the top left corner of the bitmap.

Parameters:

textureBitmap	Handle to texture bitmap.
featureStartX	Returns X coordinate of feature start point.
featureStartY	Returns Y coordinate of feature start point.

Declaration:

FUNCTION   GetTexBitFeatureSize

( textureBitmap:HANDLE ) :REAL ;

Description:

Function GetTexBitFeatureSize returns the feature size of the referenced bitmap in real world inches.

Parameters:

textureBitmap

Handle to texture bitmap.

Declaration:

PROCEDURE   GetTexBitmapOrigin

(   textureBitmap :HANDLE;   VAR  originX :INTEGER;   VAR  originY :INTEGER ) ;

Special Notes:

GetTexBitmapOrigin is obsolete as of VectorWorks9.0

Description:

Procedure GetTexBitmapOrigin returns the origin of the bitmap applied to the referenced texture bitmap. The origin is measured in pixels, with the top left corner as (0,0).

Parameters:

textureBitmap	Handle to texture bitmap.
originX	Returns X coordinate of bitmap origin.
originY	Returns Y coordinate of bitmap origin.

Declaration:

FUNCTION   GetTexBitPaintNode

( textureBitmap:HANDLE ) :HANDLE ;

Special Notes:

GetTexBitPaintNode is obsolete as of VectorWorks12.0

Description:

Function GetTexBitPaintNode returns the paint node of the referenced texture bitmap.

Parameters:

textureBitmap

Handle to texture bitmap.

Declaration:

FUNCTION   GetTexBitRepHoriz

( textureBitmap:HANDLE ) :BOOLEAN ;

Description:

Function GetTexBitRepHoriz returns whether the referenced texture bitmap is set to repeat horizontally.

Parameters:

textureBitmap

Handle to texture bitmap.

Result:

The function returns TRUE if the texture bitmap is set to repeat.

Declaration:

FUNCTION   GetTexBitRepVert

( textureBitmap:HANDLE ) :BOOLEAN ;

Description:

Function GetTexBitRepVert returns whether the referenced texture bitmap is set to repeat vertically.

Parameters:

textureBitmap

Handle to texture bitmap.

Result:

The function returns TRUE if the texture bitmap is set to repeat.

Declaration:

FUNCTION   GetTexMapBool

(   h :HANDLE;     partID :LONGINT;     selector :INTEGER ) :BOOLEAN ;

Special Notes:

GetTexMapBool is obsolete as of Vectorworks 2010

Description:

Get map info for specific part of object. partID is texture part, overall is 3. Selector: init:1, flip:2, repH:3, repV:4, long edge:5, worldZ:6, auto align:7

Declaration:

FUNCTION   GetTexMapBoolN

(   obj :HANDLE;     texPartID :LONGINT;     texLayerID :LONGINT;     selector :INTEGER ) :BOOLEAN ;

Description:

Get map info for specific part of object. partID is texture part, overall is 3. Selector: init:1, flip:2, repH:3, repV:4, long edge:5, worldZ:6, auto align:7

Parameters:

texLayerID

0 for base, >0 for decals

Declaration:

FUNCTION   GetTexMapInt

(   h :HANDLE;     partID :LONGINT;     selector :INTEGER ) :INTEGER ;

Special Notes:

GetTexMapInt is obsolete as of Vectorworks 2010

Description:

Get map info for specific part of object. partID is texture part, overall is 3. Selector should be1, to return the texture map type integer.

Declaration:

FUNCTION   GetTexMapIntN

(   obj :HANDLE;     texPartID :LONGINT;     texLayerID :LONGINT;     selector :INTEGER ) :INTEGER ;

Description:

Get map info for specific part of object. partID is texture part, overall is 3. Selector should be1, to return the texture map type integer.

Parameters:

texLayerID

0 for base, >0 for decals

Declaration:

FUNCTION   GetTexMapReal

(   h :HANDLE;     partID :LONGINT;     selector :INTEGER ) :REAL ;

Special Notes:

GetTexMapReal is obsolete as of Vectorworks 2010

Description:

Get map info for specific part of object. partID is texture part, overall is 3. Selector: offsetX:1, offsetY:2, scale2D:3, rotate2D:4, radius:5, matrix mat00 through mat32: 6-17

Declaration:

FUNCTION   GetTexMapRealN

(   obj :HANDLE;     texPartID :LONGINT;     texLayerID :LONGINT;     selector :INTEGER ) :REAL ;

Description:

Get map info for specific part of object. partID is texture part, overall is 3. Selector: offsetX:1, offsetY:2, scale2D:3, rotate2D:4, radius:5, matrix mat00 through mat32: 6-17

Parameters:

texLayerID

0 for base, >0 for decals

Declaration:

PROCEDURE   GetTexSpace2DOffset

(   textureSpace :HANDLE;   VAR  offsetU :REAL;   VAR  offsetV :REAL ) ;

Special Notes:

GetTexSpace2DOffset is obsolete as of Vectorworks 2009

Description:

Procedure GetTexSpace2DOffset returns the 2D offset for the referenced texture space in real-world inches.

Parameters:

textureSpace	Handle to texture space.
offsetU	Returns texture offset U component.
offsetV	returns texture offset V component.

Declaration:

FUNCTION   GetTexSpace2DRadius

( textureSpace:HANDLE ) :REAL ;

Special Notes:

GetTexSpace2DRadius is obsolete as of Vectorworks 2009

Description:

Function GetTexSpace2DRadius returns the radius of the referenced texture space for applicable mapping types.

Parameters:

textureSpace

Handle to texture space.

Declaration:

FUNCTION   GetTexSpace2DRot

( textureSpace:HANDLE ) :REAL ;

Special Notes:

GetTexSpace2DRot is obsolete as of Vectorworks 2009

Description:

Function GetTexSpace2DRot returns the rotation of the referenced texture space (in degrees).

Parameters:

textureSpace

Handle to texture space.

Declaration:

FUNCTION   GetTexSpace2DScale

( textureSpace:HANDLE ) :REAL ;

Special Notes:

GetTexSpace2DScale is obsolete as of Vectorworks 2009

Description:

Function GetTexSpace2DScale returns the 2D scale for the referenced texture space.

Parameters:

textureSpace

Handle to texture space.

Declaration:

FUNCTION   GetTexSpaceEndCap

( textureSpace:HANDLE ) :BOOLEAN ;

Special Notes:

GetTexSpaceEndCap is obsolete as of Vectorworks 2009

Description:

Function GetTexSpaceEndCap returns whether the end cap of the referenced extrude or sweep is textured.

Parameters:

textureSpace

Handle to texture space.

Declaration:

FUNCTION   GetTexSpaceKind

( textureSpace:HANDLE ) :INTEGER ;

Special Notes:

GetTexSpaceKind is obsolete as of Vectorworks 2009

Description:

Function GetTexSpaceKind returns the object type for texture mapping space.

Table - Texture Mapping Spaces

Date Style	Constant
Plane	0
Sphere	1
Cylinder	2
Algorithmic	3

Parameters:

textureSpace

Handle to texture space.

Declaration:

PROCEDURE   GetTexSpaceOrientU

(   textureSpace :HANDLE;   VAR  uXAxis :REAL;   VAR  uYAxis :REAL;   VAR  uZAxis :REAL ) ;

Special Notes:

GetTexSpaceOrientU is obsolete as of Vectorworks 2009

Description:

Procedure GetTexSpaceOrientU returns the vector that describes the u-axis of the referenced texture (from world space to texture space).

Parameters:

textureSpace	Handle to texture space.
uXAxis	Returns u-axis vector X component.
uYAxis	Returns u-axis vector Y component.
uZAxis	Returns u-axis vector Z component.

Declaration:

PROCEDURE   GetTexSpaceOrientV

(   textureSpace :HANDLE;   VAR  vXAxis :REAL;   VAR  vYAxis :REAL;   VAR  vZAxis :REAL ) ;

Special Notes:

GetTexSpaceOrientV is obsolete as of Vectorworks 2009

Description:

Procedure GetTexSpaceOrientV returns the vector that describes the v-axis of the referenced texture (from world space to texture space).

Parameters:

textureSpace	Handle to texture space.
vXAxis	Returns v-axis vector X component.
vYAxis	Returns v-axis vector Y component.
vZAxis	Returns v-axis vector Z component.

Declaration:

PROCEDURE   GetTexSpaceOrientW

(   textureSpace :HANDLE;   VAR  wXAxis :REAL;   VAR  wYAxis :REAL;   VAR  wZAxis :REAL ) ;

Special Notes:

GetTexSpaceOrientW is obsolete as of Vectorworks 2009

Description:

Procedure GetTexSpaceOrientW returns the vector that describes the w-axis of the referenced texture (from world space to texture space).

Parameters:

textureSpace	Handle to texture space.
wXAxis	Returns w-axis vector X component.
wYAxis	Returns w-axis vector Y component.
wZAxis	Returns w-axis vector Z component.

Declaration:

PROCEDURE   GetTexSpaceOrigin

(   textureSpace :HANDLE;   VAR  offsetX :REAL;   VAR  offsetY :REAL;   VAR  offsetZ :REAL ) ;

Special Notes:

GetTexSpaceOrigin is obsolete as of Vectorworks 2009

Description:

Procedure GetTexSpaceOrigin returns the offset of the referenced texture space that takes coordinates from world space to texture space.

Parameters:

textureSpace	Handle to texture space.
offset	Returns texture space offset value.

Declaration:

FUNCTION   GetTexSpacePartID

( textureSpace:HANDLE ) :INTEGER ;

Special Notes:

GetTexSpacePartID is obsolete as of Vectorworks 2009

Description:

Function GetTexSpacePartID returns the parent of the referenced texture space in an expanded object (walls or roofs).

Table - Texture Space Objects

Object	Constant
Primary	0
Secondary	1
Tertiary	2

Parameters:

textureSpace

Handle to texture space.

Declaration:

FUNCTION   GetTexSpaceStartCap

( textureSpace:HANDLE ) :BOOLEAN ;

Special Notes:

GetTexSpaceStartCap is obsolete as of Vectorworks 2009

Description:

Function GetTexSpaceStartCap returns whether the start cap of an extrude or sweep is textured.

Parameters:

textureSpace

Handle to texture space.

Declaration:

FUNCTION   GetTextureBitmap

( shaderRecord:HANDLE ) :HANDLE ;

Description:

Function GetTextureBitmap returns the bitmap object attached to the referenced texture.

Parameters:

shaderRecord

Handle to shader record.

Result:

If there is no texture applied to an object the function returns NIL.

Declaration:

FUNCTION   GetTextureRef

(   obj :HANDLE;     partID :INTEGER;     resolveByClass :BOOLEAN ) :LONGINT ;

Special Notes:

GetTextureRef is obsolete as of Vectorworks 2010

Description:

Function GetTextureRef returns the texture reference ID for the referenced object. The integer returned is the internal index of the texture node used by this object.

Parameters:

obj	Handle to object.
partID	Identifies texture to be returned by part ID.
resolveByClass	Resolve texture reference by class.

Declaration:

FUNCTION   GetTextureRefN

(   obj :HANDLE;     texPartID :LONGINT;     texLayerID :LONGINT;     resolveByClass :BOOLEAN ) :LongInt ;

Description:

Returns the texture reference for a specified object.

Parameters:

texLayerID

Texture layer ID, 0 for base, >0 for decals

Declaration:

FUNCTION   GetTextureSet

( object:HANDLE ) :INTEGER ;

Description:

Gets the texture set of an object.

Parameters:

object

The object.

Result:

The texture set.

0 - Object textures
1 - Component textures

See Also:

SetTextureSet  

Declaration:

FUNCTION   GetTextureShader

( texture:HANDLE ) :LONGINT ;

Special Notes:

GetTextureShader is obsolete as of VectorWorks9.0

Description:

Function GetTextureShader returns the LightWorks internal property reference ID for the shader attached to the referenced texture.

Parameters:

texture

Handle to texture.

Declaration:

FUNCTION   GetTextureShininess

( texture:HANDLE ) :INTEGER ;

Special Notes:

GetTextureShininess is obsolete as of VectorWorks9.0

Description:

Function GetTextureShininess returns the shininess value of the referenced texture. The value is expressed as a percentage value with 0 equaling "Dull".

Parameters:

texture

Handle to texture.

Declaration:

FUNCTION   GetTextureSize

( texture:HANDLE ) :REAL ;

Description:

Returns the texture size in real-world inches.

Declaration:

FUNCTION   GetTextureSpace

(   obj :HANDLE;     partID :INTEGER ) :HANDLE ;

Special Notes:

GetTextureSpace is obsolete as of Vectorworks 2009

Description:

Function GetTextureSpace returns a handle to the texture space attached to the referenced object(or object part).

Parameters:

obj	Handle to object.
partID	Part ID (pass 1 for non-supporting objects).

Example:

PROCEDURE Example; 
VAR
	XAxis, YAxis, ZAxis :REAL; 
	hObj :HANDLE; 
BEGIN
	hObj := GetTextureSpace(FSActLayer, 0); 
	GetTexSpaceOrientU(hObj, XAxis, YAxis, ZAxis); 
	Writeln('U', ' : ', XAxis, ' : ', YAxis, ' : ', ZAxis); 
	GetTexSpaceOrientV(hObj, XAxis, YAxis, ZAxis); 
	Writeln('V', ' : ', XAxis, ' : ', YAxis, ' : ', ZAxis); 
	GetTexSpaceOrientW(hObj, XAxis, YAxis, ZAxis); 
	Writeln('W', ' : ', XAxis, ' : ', YAxis, ' : ', ZAxis); 
END; 
RUN(Example); 

Declaration:

FUNCTION   GetTextureTransp

( texture:HANDLE ) :INTEGER ;

Special Notes:

GetTextureTransp is obsolete as of VectorWorks9.0

Description:

Function GetTextureTransp returns the degree of transparency applied to the referenced texture. It is expressed as a percentage with 0 creating an opaque texture.

Parameters:

texture

Handle to texture.

Declaration:

FUNCTION   GetWallHoleTexturePart

( object:HANDLE ) :INTEGER ;

Description:

Gets the wall texture part of an object in the wall hole group of a symbol definition or plug-in object. This is the wall texture part given to faces of the wall that are created by cutting a hole in the wall with the object.

Parameters:

object

The handle to the cutting object in the wall hole group of a symbol definition or plug-in object.

Result:

The wall texture part.

0 - The wall Holes texture part
1 - The wall Left texture part
2 - The wall Right texture part

See Also:

SetWallHoleTexturePart  

Declaration:

FUNCTION   IsRW

:BOOLEAN ;

Description:

Indicates whether RenderWorks is available.

Result:

Returns true if RenderWorks is available, false otherwise.

Declaration:

FUNCTION   IsTextureableObject

( obj:HANDLE ) :BOOLEAN ;

Description:

Function IsTextureableObject returns whether the referenced object supports texture mapping.

Parameters:

obj	Handle to object.

Result:

Returns TRUE if object supports texture mapping.

Declaration:

FUNCTION   ResolveByClassTextureRef

(   obj :HANDLE;     partID :INTEGER ) :LONGINT ;

Description:

Function ResolveByClassTextureRef returns the internal index, or name, of the texture assigned to the referenced object.

Primary, secondary, or tertiary texture assignments can be returned for objects that support multiple textures, such as roofs or walls. For objects that do not support multiple textures, pass 0 to the partID parameter.

Table - Object Texture Reference

Texture	Index Value
Primary	0
Secondary	1
Tertiary	2

Parameters:

obj	Handle to object.
partID	Primary, secondary, or tertiary texture ID to be returned.

Example:

textureID:=ResolveByClassTextureRef(handleToObject,0);

See Also:

SetTextureRef   GetTextureRef  

Declaration:

PROCEDURE   SetClTextureC

(   className :STRING;     textureRef :LONGINT ) ;

Description:

Procedure SetClTextureC sets the wall center texture of the specified class.

Parameters:

className	Class name.
textureRef	Texture reference index value.

Declaration:

PROCEDURE   SetClTextureD

(   className :STRING;     textureRef :LONGINT ) ;

Description:

Procedure SetClTextureD sets the roof dormer texture of the specified class.

Parameters:

className	Class name.
textureRef	Texture reference index value.

Declaration:

PROCEDURE   SetClTextureG

(   className :STRING;     textureRef :LONGINT ) ;

Description:

Procedure SetClTextureG sets the generic texture of the specified class.

Parameters:

className	Class name.
textureRef	Texture reference index value.

Declaration:

PROCEDURE   SetClTextureL

(   className :STRING;     textureRef :LONGINT ) ;

Description:

Procedure SetClTextureL sets the left side wall texture of the specified class.

Parameters:

className	Class name.
textureRef	Texture reference index value.

Declaration:

PROCEDURE   SetClTextureR

(   className :STRING;     textureRef :LONGINT ) ;

Description:

Procedure SetClTextureR sets the right side wall texture of the specified class.

Parameters:

className	Class name.
textureRef	Texture reference index value.

Declaration:

PROCEDURE   SetClTextureT

(   className :STRING;     textureRef :LONGINT ) ;

Description:

Procedure SetClTextureT sets the roof top texture of the specified class.

Parameters:

className	Class name.
textureRef	Texture reference index value.

Declaration:

PROCEDURE   SetDefaultTexMap

( h:HANDLE ) ;

Special Notes:

SetDefaultTexMap is obsolete as of Vectorworks 2010

Description:

Set the object to have default texture mapping info. Texture resource being used is set with SetTextureRef. Similar to SetDefaultTextureSpace except that routine has been superseded in version 2009.

Declaration:

PROCEDURE   SetDefaultTexMapN

(   h :HANDLE;     texPartID :LONGINT;     texLayerID :LONGINT ) ;

Description:

Set the object to have default texture mapping info. Texture resource being used is set with SetTextureRef. This routine replaces SetDefaultTexMap with version 2010 and above.

Parameters:

h	The textured object
texPartID	The texture part ID
texLayerID	The texture layer ID, 0 for base, >0 for decals

Declaration:

PROCEDURE   SetDefaultTextureSpace

(   obj :HANDLE;     texSpace :HANDLE;     partID :INTEGER ) ;

Special Notes:

SetDefaultTextureSpace is obsolete as of Vectorworks 2009

Description:

Procedure SetDefaultTextureSpace sets the texture space for the referenced object to the Vectorworks object defaults.

Parameters:

obj	Handle to object.
texSpace	Handle to texture space.
partID	Part ID (pass 1 for non-supporting objects).

Declaration:

PROCEDURE   SetObjExpandTexture

(   obj :HANDLE;     expanded :BOOLEAN ) ;

Special Notes:

SetObjExpandTexture is obsolete as of Vectorworks 2009

Description:

Procedure SetObjExpandTexture sets the "expanded" state of the referenced objects' texture. When a texture is expanded, different components of an object can have different textures.

Parameters:

obj	Handle to object.
expanded	Use expanded textures setting.

Declaration:

PROCEDURE   SetTexBFeatureEnd

(   textureBitmap :HANDLE;     featureEndX :INTEGER;     featureEndY :INTEGER ) ;

Description:

Procedure SetTexBFeatureEnd sets the "feature endpoint" of the referenced texture bitmap. Parameters featureEndX and featureEndY specify the end point. The point is expressed in pixels from the top left corner of the bitmap.

Parameters:

textureBitmap	Handle to texture bitmap.
featureEndX	X coordinate of feature end point.
featureEndY	Y coordinate of feature end point.

Declaration:

PROCEDURE   SetTexBFeatureStart

(   textureBitmap :HANDLE;     featureStartX :INTEGER;     featureStartY :INTEGER ) ;

Description:

Procedure SetTexBFeatureStart sets the "feature startpoint" of the referenced texture bitmap. The point is expressed in pixels from the top left corner of the bitmap.

Parameters:

textureBitmap	Handle to texture bitmap.
featureStartX	X coordinate of feature start point.
featureStartY	Y coordinate of feature start point.

Declaration:

PROCEDURE   SetTexBitFeatureSize

(   textureBitmap :HANDLE;     featureSize :REAL ) ;

Description:

Procedure SetTexBitFeatureSize sets the feature size of the referenced bitmap. Parameter featureSize specifies the size in real world inches.

Parameters:

textureBitmap	Handle to texture bitmap.
featureSize	Feature size value.

Declaration:

PROCEDURE   SetTexBitmapOrigin

(   textureBitmap :HANDLE;     originX :INTEGER;     originY :INTEGER ) ;

Special Notes:

SetTexBitmapOrigin is obsolete as of VectorWorks9.0

Description:

Procedure SetTexBitmapOrigin sets the origin of the bitmap applied to the referenced texture bitmap. The origin is measured in pixels, with the top left corner as (0,0).

Parameters:

textureBitmap	Handle to texture bitmap.
originX	X coordinate of bitmap origin.
originY	Y coordinate of bitmap origin.

Declaration:

PROCEDURE   SetTexBitPaintNode

(   textureBitmap :HANDLE;     paintNode :HANDLE ) ;

Special Notes:

SetTexBitPaintNode is obsolete as of VectorWorks12.0

Description:

Procedure SetTexBitPaintNode sets the paint node of the referenced texture bitmap.

Parameters:

textureBitmap	Handle to texture bitmap.
paintNode	Paint node for texture bitmap.

Declaration:

PROCEDURE   SetTexBitRepHoriz

(   textureBitmap :HANDLE;     repeatHoriz :BOOLEAN ) ;

Description:

Procedure SetTexBitRepHoriz sets the horizontal repeat flag for the referenced texture bitmap.

Parameters:

textureBitmap	Handle to texture bitmap.
repeatHoriz	Horizontal tiling setting.

Declaration:

PROCEDURE   SetTexBitRepVert

(   textureBitmap :HANDLE;     repeatVert :BOOLEAN ) ;

Description:

Procedure SetTexBitRepVert sets the vertical repeat flag for the referenced texture bitmap. Parameter repeatVert toggles vertical tiling.

Parameters:

textureBitmap	Handle to texture bitmap.
repeatVert	Vertical tiling setting.

Declaration:

PROCEDURE   SetTexMapBool

(   h :HANDLE;     partID :LONGINT;     selector :INTEGER;     value :BOOLEAN ) ;

Special Notes:

SetTexMapBool is obsolete as of Vectorworks 2010

Description:

Set map info for specific part of object. partID is texture part, overall is 3. Selector: init:1, flip:2, repH:3, repV:4, long edge:5, worldZ:6, auto align:7

Declaration:

PROCEDURE   SetTexMapBoolN

(   obj :HANDLE;     texPartID :LONGINT;     texLayerID :LONGINT;     selector :INTEGER;     value :BOOLEAN ) ;

Description:

Set map info for specific part of object. partID is texture part, overall is 3. Selector: init:1, flip:2, repH:3, repV:4, long edge:5, worldZ:6, auto align:7

Declaration:

PROCEDURE   SetTexMapInt

(   h :HANDLE;     partID :LONGINT;     selector :INTEGER;     value :INTEGER ) ;

Special Notes:

SetTexMapInt is obsolete as of Vectorworks 2010

Description:

Set map info for specific part of object. partID is texture part, overall is 3. Selector should be 1 to set the map type integer.

Declaration:

PROCEDURE   SetTexMapIntN

(   obj :HANDLE;     texPartID :LONGINT;     texLayerID :LONGINT;     selector :INTEGER;     value :INTEGER ) ;

Description:

Set map info for specific part of object. partID is texture part, overall is 3. Selector should be 1 to set the map type integer.

Parameters:

texLayerID

0 for base, >0 for decals

Declaration:

PROCEDURE   SetTexMapReal

(   h :HANDLE;     partID :LONGINT;     selector :INTEGER;     value :REAL ) ;

Special Notes:

SetTexMapReal is obsolete as of Vectorworks 2010

Description:

Set map info for specific part of object. partID is texture part, overall is 3. Selector: offsetX:1, offsetY:2, scale2D:3, rotate2D:4, radius:5, matrix mat00 through mat32: 6-17

Declaration:

PROCEDURE   SetTexMapRealN

(   obj :HANDLE;     texPartID :LONGINT;     texLayerID :LONGINT;     selector :INTEGER;     value :REAL ) ;

Description:

Set map info for specific part of object. partID is texture part, overall is 3. Selector: offsetX:1, offsetY:2, scale2D:3, rotate2D:4, radius:5, matrix mat00 through mat32: 6-17

Parameters:

texLayerID

0 for base, >0 for decals

Declaration:

PROCEDURE   SetTexSpace2DOffset

(   textureSpace :HANDLE;     offsetU :REAL;     offsetV :REAL ) ;

Special Notes:

SetTexSpace2DOffset is obsolete as of Vectorworks 2009

Description:

Procedure SetTexSpace2DOffset sets the 2D offset for the referenced texture space in real-world inches.

Parameters:

textureSpace	Handle to texture space.
offsetU	Texture offset U component.
offsetV	Texture offset V component.

Declaration:

PROCEDURE   SetTexSpace2DRadius

(   textureSpace :HANDLE;     radius :REAL ) ;

Special Notes:

SetTexSpace2DRadius is obsolete as of Vectorworks 2009

Description:

Procedure SetTexSpace2DRadius sets the radius of the referenced texture space for applicable mapping types.

Parameters:

textureSpace	Handle to texture space.
radius	Radius of texture space.

Declaration:

PROCEDURE   SetTexSpace2DRot

(   textureSpace :HANDLE;     rotationDegrees :REAL ) ;

Special Notes:

SetTexSpace2DRot is obsolete as of Vectorworks 2009

Description:

Procedure SetTexSpace2DRot sets the rotation of the referenced texture space.

Parameters:

textureSpace	Handle to texture space.
rotationDegrees	Rotation of texture space(in degrees).

Declaration:

PROCEDURE   SetTexSpace2DScale

(   textureSpace :HANDLE;     scale :REAL ) ;

Special Notes:

SetTexSpace2DScale is obsolete as of Vectorworks 2009

Description:

Procedure SetTexSpace2DScale sets the 2D scale for the referenced texture space. Parameter scale specifies the new scale value.

Parameters:

textureSpace	Handle to texture space.
scale	Scale for texture space.

Declaration:

PROCEDURE   SetTexSpaceEndCap

(   textureSpace :HANDLE;     endCapTextured :BOOLEAN ) ;

Special Notes:

SetTexSpaceEndCap is obsolete as of Vectorworks 2009

Description:

Procedure SetTexSpaceEndCap sets whether the end cap of a referenced extrude or sweep is textured.

Parameters:

textureSpace	Handle to texture space.
endCapTextured	Texture end cap status.

Declaration:

PROCEDURE   SetTexSpaceKind

(   textureSpace :HANDLE;     kind :INTEGER ) ;

Special Notes:

SetTexSpaceKind is obsolete as of Vectorworks 2009

Description:

Procedure SetTexSpaceKind sets the object type for referenced texture mapping space.

Table - Texture Mapping Spaces

Date Style	Constant
Plane	0
Sphere	1
Cylinder	2
Algorithmic	3

Parameters:

textureSpace	Handle to texture space.
kind	Texture mapping space type.

Declaration:

PROCEDURE   SetTexSpaceOrientU

(   textureSpace :HANDLE;     uXAxis :REAL;     uYAxis :REAL;     uZAxis :REAL ) ;

Special Notes:

SetTexSpaceOrientU is obsolete as of Vectorworks 2009

Description:

Procedure SetTexSpaceOrientU specifies the vector that describes the u-axis of the referenced texture (from world space to texture space).

Parameters:

textureSpace	Handle to texture space.
uXAxis	Sets u-axis vector X component.
uYAxis	Sets u-axis vector Y component.
uZAxis	Sets u-axis vector Z component.

Declaration:

PROCEDURE   SetTexSpaceOrientV

(   textureSpace :HANDLE;     vXAxis :REAL;     vYAxis :REAL;     vZAxis :REAL ) ;

Special Notes:

SetTexSpaceOrientV is obsolete as of Vectorworks 2009

Description:

Procedure SetTexSpaceOrientV specifies the vector that describes the v-axis of the referenced texture (from world space to texture space).

Parameters:

textureSpace	Handle to texture space.
vXAxis	Sets v-axis vector X component.
vYAxis	Sets v-axis vector Y component.
vZAxis	Sets v-axis vector Z component.

Declaration:

PROCEDURE   SetTexSpaceOrientW

(   textureSpace :HANDLE;     wXAxis :REAL;     wYAxis :REAL;     wZAxis :REAL ) ;

Special Notes:

SetTexSpaceOrientW is obsolete as of Vectorworks 2009

Description:

Procedure SetTexSpaceOrientW specifies the vector that describes the w-axis of the referenced texture (from world space to texture space).

Parameters:

textureSpace	Handle to texture space.
wXAxis	Sets w-axis vector X component.
wYAxis	Sets w-axis vector Y component.
wZAxis	Sets w-axis vector Z component.

Declaration:

PROCEDURE   SetTexSpaceOrigin

(   textureSpace :HANDLE;     offsetX :REAL;     offsetY :REAL;     offsetZ :REAL ) ;

Special Notes:

SetTexSpaceOrigin is obsolete as of Vectorworks 2009

Description:

Procedure SetTexSpaceOrigin sets the offset of the referenced texture space that takes coordinates from world space to texture space.

Parameters:

textureSpace	Handle to texture space.
offset	Texture space offset value.

Declaration:

PROCEDURE   SetTexSpacePartID

(   textureSpace :HANDLE;     partID :INTEGER ) ;

Special Notes:

SetTexSpacePartID is obsolete as of Vectorworks 2009

Description:

Procedure SetTexSpacePartID sets the parent of the referenced texture space in an expanded object (walls or roofs).

Table - Texture Space Objects

Object	Constant
Primary	0
Secondary	1
Tertiary	2

Parameters:

textureSpace	Handle to texture space.
partID	Part ID of texture space parent.

Declaration:

PROCEDURE   SetTexSpaceStartCap

(   textureSpace :HANDLE;     startCapTextured :BOOLEAN ) ;

Special Notes:

SetTexSpaceStartCap is obsolete as of Vectorworks 2009

Description:

Procedure SetTexSpaceStartCap sets the texture status of a referenced sweep or extrude.

Parameters:

textureSpace	Handle to texture space.
startCapTextured	Texture start cap status.

Declaration:

PROCEDURE   SetTextureBitmap

(   shaderRecord :HANDLE;     textureBitmap :HANDLE ) ;

Description:

Procedure SetTextureBitmap sets the bitmap object attached to the referenced texture. If no texture is desired then set textureBitmap to NIL.

Parameters:

shaderRecord	Handle to shader record.
textureBitmap	Handle to texture bitmap.

Declaration:

PROCEDURE   SetTextureRef

(   obj :HANDLE;     textureRef :LONGINT;     partID :INTEGER ) ;

Special Notes:

SetTextureRef is obsolete as of Vectorworks 2010

Description:

Function SetTextureRef sets the texture reference ID for the referenced object.

Parameters:

obj	Handle to object.
textureRef	Texture reference ID.
partID	Part to be assigned texture reference.

Declaration:

PROCEDURE   SetTextureRefN

(   obj :HANDLE;     textureRef :LONGINT;     texPartID :LONGINT;     texLayerID :LONGINT ) ;

Description:

Sets the texture reference for a specified object

Parameters:

texLayerID

0 for base, >0 for decals

Declaration:

PROCEDURE   SetTextureSet

(   object :HANDLE;     textureSet :INTEGER ) ;

Description:

Sets the texture set of an object.

Parameters:

object	The object.
textureSet	The texture set. 0 - Object textures 1 - Component textures

See Also:

GetTextureSet  

Declaration:

PROCEDURE   SetTextureShader

(   texture :HANDLE;     shaderIndex :LONGINT ) ;

Special Notes:

SetTextureShader is obsolete as of VectorWorks9.0

Description:

Procedure SetTextureShader sets the LightWorks internal property reference ID for the shader attached to the referenced texture.

Parameters:

texture	Handle to texture.
shaderIndex	Shader ID value for texture.

Declaration:

PROCEDURE   SetTextureShininess

(   texture :HANDLE;     shininess :INTEGER ) ;

Special Notes:

SetTextureShininess is obsolete as of VectorWorks9.0

Description:

Procedure SetTextureShininess sets the shininess value of the referenced texture. The value is expressed as a percentage value in a range of 0-100 with 0 equaling "Dull".

Parameters:

texture	Handle to texture.
shininess	Shininess setting for texture.

Declaration:

PROCEDURE   SetTextureSize

(   texture :HANDLE;     newSize :REAL ) ;

Description:

Sets the texture size in real-world inches.

Declaration:

PROCEDURE   SetTextureTransp

(   texture :HANDLE;     transparency :INTEGER ) ;

Special Notes:

SetTextureTransp is obsolete as of VectorWorks9.0

Description:

Procedure SetTextureTransp sets the degree of transparency applied to the referenced texture. The transparency value is expressed in the range of 0-100, with 0 equaling opaque and 100 equaling transparent.

Parameters:

texture	Handle to texture.
transparency	Transparency setting for texture.

Declaration:

PROCEDURE   SetWallHoleTexturePart

(   object :HANDLE;     part :INTEGER ) ;

Description:

Sets the wall texture part of an object in the wall hole group of a symbol definition or plug-in object. This is the wall texture part given to faces of the wall that are created by cutting a hole in the wall with the object.

Parameters:

object	The handle to the cutting object in the wall hole group of a symbol definition or plug-in object.
part	The wall texture part. 0 - The wall Holes texture part 1 - The wall Left texture part 2 - The wall Right texture part

See Also:

GetWallHoleTexturePart